
Water Feature Controls
A convenient way to operate your facilities special features
TECHNICAL DATA Spa transmitter
Dimensions Type 1 128mm diameter X 25mm high Transmitter display Single LED
(Round deck mount) above deck (56mm overall) (on for transmit)
Dimensions Type 2 78mm wide X 122mm long Transmit frequency Single channel 433.92Mhz
(Surface mount) X 42mm deep EMC compliant to ETS
300-339 and Type Approved
Power Type 1 & 2 4.8v Rechargeable battery to ETS300-220.
Operating temperature 0-50 degrees centigrade Charger 220-240v AC input.
13A plug top Construction.
Enclosure Plastic IP67 28v DC, 60mA constant
current output. Can charge
Transmitter control Piezo switch two transmitters at the
same time.
___________________________________________________________________________________________________
TECHNICAL DATA Spa receiver
Receiver dimensions 128mm diameter X 122mm high Receiver frequency 433.92Mhz EMC compliant to
X 50mm deep ETS 00-339 and Type 3
Approved to ETS300-220.
Power requirement 240v AC single phase @ 50Hz
Receiver display Single LED Power on and
Power consumption 6 Watts Flash low transmitter
battery
Operating temperature 0-50 degrees centigrade
Outputs* Four volts free independent
Enclosure Plastic IP65 single pole outputs suitable
for operating resistive or
inductive AC/DC loads between
5v and 250v at up to 0.5 Amp.
*(Each output is a 2 second momentary make action when operated.
Up to four receivers may be used per site giving a total of
sixteen switched feature outputs.)
___________________________________________________________________________________________________
TECHNICAL DATA Spa rest period display
Dimensions 122mm diameter X 122mm high Operating temperature 0-50 degrees centigrade
X 50mm deep
Enclosure Plastic IP65
Power requirement 12v DC
Inputs 4 wire power and signal
from control unit
Power consumption 6 Watts
Display Bi colour 38mm LED
___________________________________________________________________________________________________
TECHNICAL DATA Spa rest period controller
Dimensions 122mm diameter X 122mm high Operating temperature 0-50 degrees centigrade
X 50mm deep
Enclosure Plastic IP65
Power requirement 240v AC @ 50Hz single phase
Outputs 4 wire to display unit
Power consumption 10 Watts
In order to maintain the highest standards, Topline reserves the right to alter specifications without notice.
|
 Topline Electronics Limited Unit 7 Crown Close Diplocks Way Industrial Estate Hailsham, East Sussex, BN27 3JF
|
|